RD-Fremont-Cfg2 platform software user guide

Introduction

RD (Reference Design) is a collection of resources to provide a representative view of typical compute subsystems that can be designed and implemented using specific generations of Arm IP. RD-Fremont-Cfg2 platform is a quad chip variant of the RD-Fremont platform.

RD-Fremont-Cfg2 is a quad-chip platform in which four identical chips are connected through high speed CCG link. The CCG link is enabled through CMN-Cyprus Coherent Multichip Link (CML) feature. The RD-Fremont-Cfg2 platform in particular has the following hardware configuration on each chip.

  • 4x32XMP1 Neoverse Poseidon-V cores with Direct Connect and 2MB of dedicated, private L2 cache for each core.

  • CMN-Cyprus interconnect with 7x6 mesh network.

  • Multiple AXI expansion ports for I/O Coherent PCIe, Ethernet, offload

  • Arm Cortex-M55 processor for Runtime Security Subsystem (RSS) to support Hardware Enforced Security (HES)

  • Arm Cortex-M7 for System Control Processor (SCP) and Manageability Control Processor (MCP)

  • Arm Cortex-M55 processor for Local Control Processor (LCP) for local power management of each Application Processor (AP)

The Fixed Virtual Platform of RD-Fremont-Cfg2 config supports quad chip with 4xMP1 Neoverse Poseidon-V CPUs per chip.

This document is a user guide on how to setup, build and run the RD-Fremont-Cfg2 software stack on the Fixed Virtual Platform. The components integrated into this stack is described in the software stack introduction page. An overview of the platform’s boot flow is described in boot flow overview page.

Setting up the Host Machine and Syncing the software stack

Host Machine requirements and the necessary steps to be followed to sync the software stack are listed on ‘Setup Workspace’ page.

Obtaining the RD-Fremont-Cfg2 FVP

The latest version of the RD-Fremont-Cfg2 fixed virtual platform (FVP) can be downloaded from the Arm Ecosystem FVPs page. On this page,

  • Navigate to “Neoverse Infrastructure FVPs” section.

  • Click on “Neoverse Fremont Reference Design FVP” link to obtain the list of available Neoverse RD-Fremont Reference Design FVPs.

  • Select a FVP build under the section “Download RD-Fremont” based on the host machine architecture.

    • For AArch64 host machine, click “Download Linux - Arm Host (DEV)” link.

    • For x86-64 host machine, click “Download Linux” link.

The RD-Fremont-Cfg2 FVP executable is included in the downloaded installer and named as “FVP_RD_Fremont_Cfg2”. Follow the instructions of the installer and setup the FVP. The installer, by default, selects the home directory to install the FVP. To opt for different directory than the one selected by the installer, provide an absolute path to that directory when prompted for during the FVP installation process.

Supported Features by RD-Fremont-Cfg2 platform software stack

RD-Fremont-Cfg2 platform software stack supports the following features.

Follow the links above for detailed information about the build and execute steps for each of the supported features.

Release Tags

Table below lists the release tags for the RD-Fremont-Cfg2 platform software stack and the corresponding RD-Fremont-Cfg2 FVP version that is recommended to be used along with the listed release tag. The summary of the changes introduced and tests validated in each release is listed in the release note, the link to which is in the ‘Release Tag’ column in the table below.

Release Tag

RD-Fremont-Cfg1 FVP Version

RD-INFRA-2024.01.16

11.24.16

RD-INFRA-2023.09.28

11.23.11

RD-INFRA-2023.06.28

11.22.16


Copyright (c) 2023-2024, Arm Limited. All rights reserved.