RD-V1 platform software user guide

Introduction

RD (Reference Design) is a collection of resources to provide a representative view of typical compute subsystems that can be designed and implemented using specific generations of Arm IP. RD-V1 in particular is based on the following hardware configuration.

  • 32xMP1 Neoverse V1 CPUs

  • CMN-650 interconnect

  • Multiple AXI expansion ports for I/O Coherent PCIe, Ethernet, offload

  • Arm Cortex-M7 for System Control Processor (SCP) and Manageability Control Processor (MCP)

The Fixed Virtual Platform of RD-V1 supports 16xMP1 Neoverse V1 CPUs.

RD-V1 also comes in a multi-chip variant called RD-V1-MC. The user-guide for RD-V1-MC can be obtained form here

This document is a user guide on how to setup, build and run the RD-V1 software stack on the Fixed Virtual Platform. The components integrated into this stack is described in the software stack introduction page.

Setting up the Host Machine and Syncing the software stack

Host Machine requirements and the necessary steps to be followed to sync the software stack are listed on ‘Setup Workspace’ page.

Obtaining the RD-V1 FVP

The latest version of the RD-V1 fixed virtual platform (FVP) can be downloaded from the Arm Ecosystem FVPs page. On this page, navigate to “Neoverse Infrastructure FVPs” section to download the RD-V1 platform FVP installer.

Follow the instructions of the installer and setup the FVP. The installer, by default, selects the home directory to install the FVP. To opt for different directory than the one selected by the installer, provide an absolute path to that directory when prompted for during the FVP installation process.

Supported Features by RD-V1 platform software stack

RD-V1 platform software stack supports the following features.

Follow the links above for detailed information about the build and execute steps for each of the supported features.

Release Tags

Table below lists the release tags for the RD-V1 platform software stack and the corresponding RD-V1 FVP version that is recommended to be used along with the listed release tag. The summary of the changes introduced and tests validated in each release is listed in the release note, the link to which is in the ‘Release Tag’ column in the table below.

Release Tag

RD-V1 FVP Version

RD-INFRA-2023.12.22

11.17.29

RD-INFRA-2023.09.29

11.17.29

RD-INFRA-2023.06.30

11.17.29

RD-INFRA-2023.03.31

11.17.29


Copyright (c) 2020-2023, Arm Limited. All rights reserved.