Virtio-P9

Important

This feature might not be applicable to all Platforms. Please check individual Platform pages, section Supported Features to confirm if this feature is listed as supported.

Overview of P9 filesystem

9P (or the Plan 9 Filesystem Protocol) is a network protocol developed for the Plan 9 from Bell Labs distributed operating system as the means of connecting the components of a Plan 9 system. As mentioned at lwn 9P is somewhat equivalent to NFS or CIFS, but with its own particular approach. It is not as much a way of sharing files as a protocol definition aimed at the sharing of resources in a networked environment. It works in a connection-oriented manner in which each client makes one or more connections to the server(s) of interest. The client can create file descriptors, use them to navigate around the filesystem, read and write files, create, rename and delete files, and close things down.

Overview of Virtio-P9 device

Few Arm reference design Fixed Virtual Platforms (FVPs) for infastructure implement a subset of the Plan 9 file protocol over a virtio transport. This component is called Virtio-P9 device and it enables accessing a directory on the host’s filesystem within Linux, or another operating system that implements the protocol, running on a platform model. Put simply 9P filesystem protocol enables communicating the file I/O operations between guest systems or clients and the 9p server.

Linux running on the host uses the v9fs which is a Unix implementation of the Plan 9 9p remote filesystem protocol, in conjunction with the virtio transport protocol to allow filesystem I/O operations between host and the FVP.

As mentioned on the Arm Fixed Virtual Platform page (FVP) the component implements a subset of the Linux 9P2000.L protocol with the limitation that the guest can mount only one host directory per instance of the component.

Build the platform software

Note

This section assumes the user has completed the chapter Getting Started and has a functional working environment.

Refer to the Busybox Boot page to build the reference design platform software stack and boot into busybox on the Neoverse RD FVP.

Running the test to validate Virtio-P9 device

To begin validating the Virtio-P9 device create a directory on the host Linux machine from which the target platform FVP is launched. This directory is used as a shared directory between the host and target FVP.
```
mkdir /tmp/hostsharedir
```
Copy few files that can be shared to the target platform into this hostsharedir. The files can be read/written from the booted target platform for validating Virtio-P9.
To enable Virtio-P9 device on the platform pass the following additional parameter when launching the target platform FVP:
```
-C board.virtio_p9.root_path=<Path_to_shared_dir>
```

Example,

-C board.virtio_p9.root_path=/tmp/hostsharedir

As mentioned in the Busybox Boot guide boot to busybox using the commands mentioned below.
```
./boot.sh -p <platform name> -a <additional_params> -n [true|false]
```

Here the supported command line options are:

-p <platform name>
- Lookup for a platform name in Platform Names.
-n [true|false] (optional)
- Controls the use of network ports by the model. If network ports have to be enabled, use ‘true’ as the option. Default value is set to ‘false’.
-a <additional_params> (optional)
- Specify any additional model parameters to be passed. The model parameters and the data to be passed to those parameters can be found in the FVP documentation.

Example command to boot a RD-N2-Cfg1 platform upto busybox prompt with Virtio-P9 device enabled:

./boot.sh -p rdn2cfg1 -a '-C board.virtio_p9.root_path=/tmp/hostsharedir'

Once the platform is booted mount the 9P filesystem from busybox prompt:
```
mount -t 9p -o trans=virtio,version=9p2000.L FM <mount_point>
```

Example,

mount -t 9p -o trans=virtio,version=9p2000.L FM /mnt

Now access the files present in the mounted /mnt directory and verify that the files can be read from and written to.
Try creating a new test file in the mounted path to transfer some data from the booted target platform to the host PC.
```
dmesg > /mnt/kernel_logs.txt
```
Try to access the shared directory on the host PC to verify that the file created on the target platform is also visible in host PC.
```
cat /tmp/hostsharedir/kernel_logs.txt
```
Once the file accesses are validated between the host PC and target FVP platform unmont the 9P filsystem from the target platform’s busybox prompt.
```
umount /mnt
```

This completes the validation of Virtio-P9 component on Arm infrastructure reference design platforms.