RD-Fremont Platform
Overview
RD (Reference Design) is a collection of resources to provide a representative view of typical compute subsystems that can be designed and implemented using specific generations of Arm IP. RD-Fremont is the first RD platform with Realm Management Extension (RME) support and is based on the following hardware configuration.
32xMP1 Neoverse Poseidon-V cores with Direct Connect and 2MB of dedicated, private L2 cache for each core.
CMN-Cyprus interconnect with 7x6 mesh network.
Multiple AXI expansion ports for I/O Coherent PCIe, Ethernet, offload
Arm Cortex-M55 processor for Runtime Security Engine (RSE) to support Hardware Enforced Security (HES)
Arm Cortex-M7 for System Control Processor (SCP) and Manageability Control Processor (MCP)
Arm Cortex-M55 processor for Local Control Processor (LCP) for local power management of each Application Processor (AP)
The Fixed Virtual Platform of RD-Fremont config supports 16xMP1 Neoverse Poseidon-V CPUs.
The components integrated into this stack are described in Software Stack section.
Platform Specific Details
The following documents provide specific details applicable for RD-Fremont Platform:
Supported Features
RD-Fremont platform software stack supports the following features.
Obtaining FVP
The latest version of the RD-Fremont fixed virtual platform (FVP) can be downloaded from the Arm Ecosystem FVPs page. On this page,
Navigate to “Neoverse Infrastructure FVPs” section.
Click on “Neoverse Fremont Reference Design FVP” link to obtain the list of available Neoverse RD-Fremont Reference Design FVPs.
Select a FVP build under the section “Download RD-Fremont” based on the host machine architecture.
For AArch64 host machine, click “Download Linux - Arm Host (DEV)” link.
For x86-64 host machine, click “Download Linux” link.
The RD-Fremont FVP executable is included in the downloaded installer and named as “FVP_RD_Fremont”. Follow the instructions of the installer and setup the FVP. The installer, by default, selects the home directory to install the FVP. To opt for different directory than the one selected by the installer, provide an absolute path to that directory when prompted for during the FVP installation process.